Skip to content

Country

5/8-36 Female Spline, Weld On Coupler, fits 6.4:1, 10:1, 12:1, 15:1 Stiletto Rack-n-Pinion

SKU C42-355-B
Select Style - Size
Regular price $59.99

Spend $175 to get free shipping
Crafted-in-USA Stiletto Replacement Boot and Wire Kit 2-1 4 Inch OD x 1-1 2 Inch ID: 9 Peaks: Dwarf Mod-lite Rack N Pinions

You may also need

Smooth Bored Both Ends, Roller Bearing Steering U-Joint

Smooth Bored Both Ends, Roller Bearing Steering U-Joint


Self-Lubricating Bearings, Pair

Self-Lubricating Bearings, Pair


C42-353-B
Spline is correctly sized to fit the Stiletto 5/8-36 spline pinion
Machined from 4130 N Chromoly

C42-355
Spline is correctly sized to fit the Stiletto 5/8-36 spline pinion
Machined from 1018 mild steel

C42-355-B
Spline is correctly sized to fit the Stiletto 5/8-36 spline pinion
Machined from 1018 mild steel

C42-403-A
Spline is correctly sized to fit the Stiletto 5/8-36 spline pinion
Machined from 4130 N Chromoly

C42-403-B
Spline is correctly sized to fit the Stiletto 5/8-36 spline pinion
Machined from 4130 N Chromoly

 

The pressure angle of this spline is unique to Stiletto, this spline will not fit other 5/8-36 OEM type applications.

We offer several types of weldable splined couplers to achieve a proper and secure connection between a steering shaft or drive unit and the steering box when a U-joint is not desired.

Split-Bolt coupler:  Provides positive clamping on the splines, plus the added security of the bolt passing thru the retaining groove of the pinion. When space or weight savings is a primary concern, the Dual-Lock coupler or Straight coupler are other options to consider. The Straight coupler does not have built-in retention so the installer should incorporate a security method for the specific application. The splines in these couplers are precision broached to the correct size and we guarantee they will fit their intended purpose. 

Dual-Lock coupler:
The Dual-Lock coupler has two set screws with locking nuts offset 90 degrees from each other. This dual set screw design draws up the connection thereby eliminating the potential of undesirable lost motion with normal spline clearance. To prevent spline deformation the locking screws are positioned to locate in the external retaining groove of the pinion. The splines in these couplers are precision broached to the correct size and we guarantee they will fit their intended purpose.

Straight coupler: This coupler has no built-in retention provision; the installer will need incorporate a security method of locking the coupler to the male pinion for the specific application.  

The splines in these couplers are precision broached to the correct size - we guarantee they will fit their intended purpose.

Back to top

Spend $175.00 to get free shipping to the lower 48 US states.

Shopping Cart

Your cart is currently empty

Shop now