Bolt-On Aluminum Filler Cap Bung
You may also need
Easy Turn Filler Cap with O-Ring
Easy Turn Filler Cap with O-Ring
Easy Turn Filler Cap Bolt-On Bung Replacement O-Ring, .103 Inch Thick Buna Material
Easy Turn Filler Cap Bolt-On Bung Replacement O-Ring, .103 Inch Thick Buna Material
NPT Female Weld Bung
NPT Female Weld Bung
Easy Turn Filler Cap Replacement O-Ring, Buna Material
Easy Turn Filler Cap Replacement O-Ring, Buna Material
AN Thread Weld Bung
AN Thread Weld Bung
1-5/8 Inch Aluminum Bolt-On Bung
1-1/4-12 Straight Thread
4 on 2 in. Bolt Circle
9/16 in. Bung Height
(Replacement base O-Ring is C73-748)
2 Inch Aluminum Bolt-On Bung
1-1/2-12 Straight Thread
4 on 2.25 in. Bolt Circle
9/16 in. Bung Height
(Replacement base O-Ring is C73-768)
2-3/4 Inch Aluminum Bolt-On Bung
2-1/4-10 Straight Thread
5 on 3.125 in. Bolt Circle
11/16 in. Bung Height
(Replacement base O-Ring is C73-789)
There are many very useful applications; ideal for composites when welding isn't an option and thin gauge materials that are too difficult to weld, or any installation that already has a sensitive protective finish applied. These are also a favorite of engine builders for filling oil in valve covers.
The Pro-Werks Bolt-on filler cap bungs require no welding; this produces a very clean finished installation every time. The base of the Silver anodized aluminum bung is machined to accept the provided Buna O-ring for a positive seal, mounting hardware is included.
Leak-Proof O-Ring Seal
Great Caps. Great Colors.
To compliment the color coordination of your project, the caps are finished off in Pro-Werks Brilliance anodized colors in your choice of Black, Red, Blue, or beautifully Micro-Polished aluminum – the finishes are impeccable!
The Right Size Matters
Proudly Made in the USA
Be sure to check out the entire line up - Billet aluminum Easy Turn Fill Caps are a Pro-werks specialty.
You can always count on Pro-Werks to do it right!
Customer Comments:
"I use your bolt on caps and bungs on my carbon fiber Cummins common rail valve covers. Love the quality. Thank you."– Randy Davis, Owner of OldSkoolFab, Inc.
"I upgraded my fuel cell to an Easy Turn fill cap assembly. It wasn't long until all my friends did the same. Great product!"
– As shared with us at the PRI Show
Frequently Asked Questions
Q: How much do I need to tighten a fill cap?
A: It is not necessary to bottom the fill cap into the bung−just adequately seat the O-ring. The radial squeeze action on the O-ring creates a positive seal and helps prevent the cap from coming loose.
Q: What should I use to lubricate the Buna O-ring?
A: Applied periodically, a light coating of Dielectric grease has proven to work well as an O-ring lubricant.
Q: Is Buna rubber compatible with my fluid?
A: Buna is a synthetic rubber compound suitable for use with many fluids. Buna components may need to be replaced by a material compatible with the specific chemistry of some fluids.